|
|
 |
|
Aditya Industries manufactures a wide
range of rubber hoses for steam, air, gas, water, petroleum,
oil, acids, chemicals, other liquids and solids and caters to
various industries like petrochemicals, chemicals, oil
refineries, cement, steel, mining, food, automotive, railways,
defense, aviation, aerospace, construction, shipping etc.
The hoses are constructed using specially blended synthetic
polymer for the tubes and weather, heat and abrasion resistant
synthetic polymer for the cover. The hoses are reinforced with
fabric with/without helical wire. Hoses can be supplied with
built-in nipples, flanges and other end-fittings.
|
|
| Oil Suction and Discharge Hoses |
|
|
|
Specifications
: |
BS 1435, BS 3492, IS 8189 and IS
10733. |
|
Applications
: |
For Suction and discharge of fuel, oils,
gasoline, diesel oil, crude oil,
etc. |
|
Dimensions
: |
Diameter 37 mm to 250 mm; Length upto
15m. Available in smooth bore/rough
bore. |
|
|
Steam Hoses |
|
|
|
|
Applications : |
For steam
and high temperature fluids in refineries,
petrochemical, fertilizer, paper, steel plants,
etc. |
|
Specifications
: |
BS 924, BS 796 Type
L&M |
|
Dimensions
: |
Diameter 37
mm to 250 mm; Length upto 15 m. Available in
smooth bore/rough
bore. |
|
|
Chemical / Acid Resistant Suction /
Delivery Hoses |
|
| Applications
: |
BS 926 Type
E. |
| Specifications : |
For
suction and discharge of acids, alkalis,
solutions of inorganic salts, chemical products,
etc, in chemical plants and
vehicles. |
| Dimensions
: |
ID 20 mm to 120 mm; Length upto 18 m for
Delivery Hoses .
ID 25 mm to 200 mm; Length
upto 15m for Suction and Discharge
Hoses.
Also available with built -in-rubber
flanges. |
|
|
Pneumatic/Air/Rock Drill Hoses |
|
| Applications : |
IS 446, IS 911. |
| Specifications
: |
Rock
drilling-mines, tunnels, quarries, construction,
etc. Air hoses for use with
compressors in engineering industry
for WP of
upto 14 kg/Cm2 |
| Dimensions
: |
ID 12.5 mm to50 mm; Length upto
18m. |
|
|
Sand & Shot Blast Hoses |
|
| Specifications : |
BS 924 Part 9 Type K, Is 5894
Type I & II. |
| Applications
: |
High abrasion resistant
polymer is used for lining and the hoses are
used for sand/shot blasting purposes, (cleaning
metal surfaces, smoothening metal
castings). |
| Dimensions : |
ID 12.5 mm to 50 mm; Length
upto 18
m. |
|
|
Water Delivery Hoses |
|
| Specifications :
|
IS 444, IS 912, IS 913, IS
914. |
| Applications : |
RP's Deluxe Water Delivery
Hose is useful for service of construction sites
mines, mills, etc. Also for gardening and
domestic use. |
| Dimension : |
ID 12.5 mm to 150 mm. Length
upto 18m.
Both plain and outside armored
hoses are
available. |
|
|
Water Suction Hoses |
|
| Specifications : |
IS 2482, IS
2410, IS 3549. |
| Applications : |
Agriculture,
construction industries, ships and also for
dewatering of pits and mines. |
| Dimensions
: |
ID 25 mm to
450 mm; Length upto 18 m.
Both plain and
armoured. Available in rough bore of smooth bore
with/without end
connections. |
|
|
Cement Grounting Hoses |
|
|
Applications
: |
Cement grouting at
construction site, transporting dry/wet concrete
mixtures, irrigation projects
etc. |
|
Dimensions
: |
ID 50 mm to 250 mm; Length
upto 18
m. |
|
|
Slurry Hoses |
|
| Applications
: |
Mining, Cement Quarrying
Industries |
| Dimensions
: |
ID 100mm to 300 mm; Length upto 9
m. |
|
|
Asbestos Covered Hoses/Furnace
Cooling/Copper Cable Sheeting Hoses |
|
| Applications
: |
Used as Induction Hoses for
furnace cooling and copper cable sheeting in oil
industries, coal/lignite units, induction
furnaces. |
| Dimensions
: |
ID 100mm to 300 mm; Length
upto 9
m. |
|
|
Rail/Lorry Hoses |
|
| Applications
: |
For conveying fluids from rail
wagons/lorries etc. |
| Dimensions
: |
ID 38 mm to 75 mm; Length upto
18m. |
|
|
Tanker Discharge Hoses |
|
|
Applications
: |
For carrying oil from steamers to the
shore. |
|
Dimensions
: |
ID 100 mm to 250 mm; Length upto 9
m |
|
|
Vacuum Brake Hoses/Air
Brake Hoses |
|
|
Applications
: |
Manufactured as per Railway
specifications for connecting the brake system
of railway
wagons. |
|
|
Viton/Silicone
Hoses |
|
|
Applications
: |
For high temperature
applications. |
|
|
Brewery/Dairy/Food Grade
Hoses (Non-Toxic) |
|
|
Applications
: |
Specially for handling food
grade materials like milk, dairy products,
vegetable oils, alcoholic and soft
beverages. |
|
Dimensions
: |
ID 25 mm to 100mm; Length upto
18m |
|
| Petrol Dispensing Hose |
|
| Applications
: |
For dispensing petrol/diesel at petrol
pumps. |
| Dimensions
: |
ID 20 mm to 31.5 mm; Length upto
16m. |
|
|
|
|
[ Back ] [ Goto Top of Page ] |
|
|
|
| 
